Quick Answer (for busy buyers)
Applicable requirements and regulatory responsibilities depend on product classification and target market. Confirm the responsible parties and any filing or update obligations for your specific project.
- For Amazon FBA, the most effective leakage-reduction specs are: (1) induction seal on every bottle (foil seal matched to PET/HDPE or glass), (2) closure with a PE foam liner or EPE gasket, (3) tamper-evident shrink band, and (4) cap/pump lock (disc-top or lockable pump for body wash; tight screw cap for body oil).
- Set and verify application torque and re-torque after 24 hours; leave controlled headspace to avoid pressure weeping during transit.
- On the pack-out side, we recommend individual unit polybagging for liquids (with appropriate warning), plus a snug inner fit (carton insert or bubble sleeve) to prevent cap side-load.
- Avoid acrylic unless you need the look; it typically adds lead time and can crack under impact.
- Operationally, our MOQ is typically 1,000-3,000 units depending on packaging and formula complexity (kits are usually higher).
- After sample confirmation, mass production is commonly 10-20 working days, while packaging ordering can take 10-30 working days (e.g., glass bottles ~15 days; acrylic up to ~30 days).
- We can support documentation and arrange product send-out testing/report tracking; we also provide barcode and packaging design support.
Buyer outcome
Use the answer to clarify requirements, compare options, and prepare project questions.
Before requesting a quote
Confirm the target market, product type, packaging requirements, and unresolved details.
⚠️
This page is a practical buyer guide. For regulatory topics, verify current requirements with the relevant authorities and qualified advisers for your product and target market.
